Did the COVID-19 pandemic play a role in the spatial and temporal variations of microplastics? Evidence from a tropical river in southern India.

Personal protective equipment (PPE) use has increased because of COVID-19, producing more microplastics (MPs). The pandemic's impact on MP pollution in Indian rivers is little understood. In this study, the Netravathi River in Karnataka was investigated for the spatiotemporal distribution of MPs. The MPs abundance, size, and categories varied seasonally, with a higher concentration during the monsoon seasons. The reduction in rainfall during MON20 and the COVID-19 lockdown can be the reasons for the significant decrease in the MP concentration when compared to MON19. Polyethylene and polyethylene terephthalate were the most abundant polymers, with a shift from polyethylene to the latter (74 %) during post-monsoon season post-lockdown. The situation of MP pollution in Western Ghats can be mitigated with the aid of appropriate waste management of plastic trash and greater public awareness about the disposal of single-use plastics, which has risen significantly during the COVID-19 pandemic.

A long-term passive sampling approach for wastewater-based monitoring of SARS-CoV-2 in Leipzig, Germany.

Wastewater-based monitoring of SARS-CoV-2 has become a promising and useful tool in tracking the potential spread or dynamics of the virus. Its recording can be used to predict how the potential number of infections in a population will develop. Recent studies have shown that the use of passive samplers is also suitable for the detection of SARS-CoV-2 genome copies (GC) in wastewater. They can be used at any site, provide timely data and may collect SARS-CoV-2 GC missed by traditional sampling methods. Therefore, the aim of this study was to evaluate the suitability of passive samplers for the detection of SARS-CoV-2 GC in wastewater in the long-term at two different scales. Polyethylene-based plastic passive samplers were deployed at the city-scale level of Leipzig at 13 different locations, with samples being taken from March 2021 to August 2022. At the smaller city district level, three types of passive samplers (cotton-cloth, unravelled polypropylene plastic rope and polyethylene-based plastic strips) were used and sampled on a weekly basis from March to August 2022. The results are discussed in relation to wastewater samples taken at the individual passive sampling point. Our results show that passive samplers can indicate at a city-scale level an accurate level of positive infections in the population (positive-rate: 86 %). On a small-scale level, the use of passive samplers was also feasible and effective to detect SARS-CoV-2 GC easily and cost-effectively, mirroring a similar trend to that at a city-scale level. Thus, this study demonstrated that passive samplers provide reproducible SARS-CoV-2 GC signals from wastewater and a time-integrated measurement of the sampled matrix with greater sensitivity compared to wastewater. We thus recommend the use of passive samplers as an alternative method for wastewater-based epidemiology. Passive samplers can in particular be considered for a better estimation of infections compared to incidence levels.

First report on the toxicity of SARS-CoV-2, alone and in combination with polyethylene microplastics in neotropical fish.

The COVID-19 pandemic has caused unprecedented negative impacts in the modern era, including economic, social, and public health losses. On the other hand, the potential effects that the input of SARS-CoV-2 in the aquatic environment from sewage may represent on non-target organisms are not well known. In addition, it is not yet known whether the association of SARS-CoV-2 with other pollutants, such as microplastics (MPs), may further impact the aquatic biota. Thus, we aimed to evaluate the possible ecotoxicological effects of exposure of male adults Poecilia reticulata, for 15 days, to inactivated SARS-CoV-2 (0.742 pg/L; isolated SARS.CoV2/SP02.2020.HIAE.Br) and polyethylene MP (PE MPs) (7.1 × 104 particles/L), alone and in combination, from multiple biomarkers. Our data suggest that exposure to SARS-CoV-2 induced behavioral changes (in the open field test), nephrotoxic effect (inferred by the increase in creatinine), hepatotoxic effect (inferred by the increase in bilirubin production), imbalance in the homeostasis of Fe, Ca, and Mg, as well as an anticholinesterase effect in the animals [marked by the reduction of acetylcholinesterase (AChE) and butyrylcholinesterase (BChE) activity]. On the other hand, exposure to PE MPs induced a genotoxic effect (assessed by the comet assay), as well as an increase in enzyme activity alpha-amylase, alkaline phosphatase, and carboxylesterases. However, we did not show synergistic, antagonistic, or additive effects caused by the combined exposure of P. reticulata to SARS-CoV-2 and PE MPs. Principal component analysis (PCA) and values from the "Integrated Biomarker Response" index indicate that exposure to SARS-CoV-2 was determinant for a more prominent effect in the evaluated animals. Therefore, our study sheds light on the ecotoxicity of the new coronavirus in non-target organisms and ratifies the need for more attention to the impacts of COVID-19 on aquatic biota.

All-Fabric Triboelectric Nanogenerator (AF-TENG) Smart Face Mask: Remote Long-Rate Breathing Monitoring and Apnea Alarm.

Since the beginning of the COVID-19 pandemic, the use of face masks has become not only mandatory in several countries but also an acceptable approach for combating the pandemic. In the quest for designing an effective and useful face mask, triboelectric nanogenerators (TENGs) have been recently proposed. Novel functionalities are provided with the use of TENGs in face masks due to the induced triboelectrification generated by the exhaled and inhaled breath, allowing their use as an energy sensor. Nonetheless, within the face mask, the presence of nontextile plastics or other common triboelectric (TE) materials can be undesired. Herein, we propose the use of an all-fabric TENG (AF-TENG) with the use of high molecular weight polyethylene (UHMWPE) and cotton fabric as negative and positive triboelectric layers, respectively. With these materials, it is possible to detect the breathing of the patient, which in the case of not detecting a signal over a few minutes can trigger an alarm locally, providing valuable time. Also, in this article, we have sent breathing signals locally and remotely to distances up to 20 km via Wi-Fi and LoRa, the same as warning signals in the case of detecting anomalies. This work reveals the use of TENGs in smart face masks as an important tool to be used in difficult epidemiological periods to the general public, bringing much more comfort and relaxation to patients and elderly in today's society, and based on pristine eco-friendly materials.

Multigenerational effects of microplastic fragments derived from polyethylene terephthalate bottles on duckweed Lemna minor: Size-dependent effects of microplastics on photosynthesis.

The 2019 global coronavirus disease pandemic has led to an increase in the demand for polyethylene terephthalate (PET) packaging. Although PET is one of the most recycled plastics, it is likely to enter the aquatic ecosystem. To date, the chronic effects of PET microplastics (MPs) on aquatic plants have not been fully understood. Therefore, this study aimed to investigate the adverse effects of PET MP fragments derived from PET bottles on the aquatic duckweed plant Lemna minor through a multigenerational study. We conducted acute (3-day exposure) and multigenerational (10 generations from P0 to F9) tests using different-sized PET fragments (PET0-200, < 200 µm; PET200-300, 200-300 µm; and PET300-500, 300-500 µm). Different parameters, including frond number, growth rate based on the frond area, total root length, longest root length, and photosynthesis, were evaluated. The acute test revealed that photosynthesis in L. minor was negatively affected by exposure to small-sized PET fragments (PET0-200). In contrast, the results of the multigenerational test revealed that large-sized PET fragments (PET300-500) showed substantial negative effects on both the growth and photosynthetic activity of L. minor. Continuous exposure to PET MPs for 10 generations caused disturbances in chloroplast distribution and inhibition of plant photosynthetic activity and growth. The findings of this study may serve as a basis for future research on the generational effects of MPs from various PET products.

Survival of human coronavirus 229E at different temperatures on various food-contact surfaces and food and under simulated digestive conditions.

The COVID-19 pandemic caused by SARS-CoV-2 has had a major impact on human health and the global economy. Various transmission possibilities of SARS-CoV-2 have been proposed, such as the surface of food in the cold chain and food packaging, as well as the fecal-oral route, although person-to-person contact via droplets and aerosols has been confirmed as the main route of transmission. This study evaluated the survivability of HCoV-229E, a SARS-CoV-2 surrogate, in suspension, on food-contact surfaces and on food at various temperatures, and in simulated digestive fluids by TCID50 assay. In suspension, HCoV-229E survived after 5 days at 20 °C with a 3.69 log reduction, after 28 days at 4 °C with a 3.07 log reduction, and after 12 weeks at -20 °C with a 1.18 log reduction. On food-contact surfaces, HCoV-229E was not detected on day 3 on stainless steel (SS), plastic (LDPE), and silicone rubber (SR) at 20 °C with a 3.28, 3.24 and 3.28 log reduction, respectively, and survived after 28 days on SS and LDPE at 4 °C with a 3.13 and 2.88 log reduction, respectively, and survived after 12 weeks on SS, LDPE, and SR at -20 °C with a 1.92, 1.32 and 1.99 log reduction, respectively. On food, HCoV-229E was not detected on day 3 on lettuce and day 4 on chicken breast and salmon at 20 °C with a 3.61, 3.26 and 3.08 log reduction, respectively, and on day 14 on lettuce and day 21 on chicken breast and salmon at 4 °C with a 3.88, 3.44 and 3.56 log reduction, respectively. The virus remained viable for 12 weeks in all foods at -20 °C with 2-2.47 log reduction. In addition, in simulated digestive fluid experiments, HCoV-229E was relatively resistant in simulated salivary fluid (SSF; pH 7, 5), fed state simulated gastric fluid (FeSSGF; pH 3, 5, 7), and fasted state simulated intestinal fluid (FaSSIF; pH 7). However, the virus was less tolerant in fasted state simulated gastric fluid (FaSSGF; pH 1.6) and fed state simulated intestinal fluid (FeSSIF; pH 5). Therefore, this study suggested that HCoV-229E remained infectious on various food-contact surfaces and foods; in particular, it survived longer at lower temperatures and survived depending on the pH of the simulated digestive fluid.

Insight into the microplastics release from disposable face mask: Simulated environment and removal strategy.

The fight against the COVID-19 epidemic significantly raises the global demand for personal protective equipment, especially disposable face masks (DFMs). The discarded DFMs may become a potential source of microplastics (MPs), which has attracted much attention. In this work, we identified the detailed source of MPs released from DFMs with laser direct infrared spectroscopy. Polypropylene (PP) and polyurethane (PU) accounted for 24.5% and 57.1% of released MPs, respectively. The melt-blown fabric was a dominant MPs source, however, previous studies underestimated the contribution of mask rope. The captured polyethylene terephthalate (PET), polyamide (PA), polyethylene (PE), and polystyrene (PS) in airborne only shared 18.4% of released MPs. To deepen the understanding of MPs release from medical mask into the aquatic environment, we investigated the effects of environmental factors on MPs release. Based on regression analysis, the effects of temperature, incubation time, and wearing time significantly affect the release of MPs. Besides, acidity, alkalinity, sodium chloride, and humic acid also contributed to the MPs release through corroding, swelling, or repulsion of fibers. Based on the exposure of medical mask to simulated environments, the number of released MPs followed the order: seawater > simulated gut-fluid > freshwater > pure water. Considering the risk of MPs released from DFMs to the environment, we innovatively established a novel flotation removal system combined with cocoamidopropyl betaine, achieving 86% removal efficiency of MPs in water. This work shed the light on the MPs release from DFMs and proposed a removal strategy for the control of MPs pollution.

Removal and toxic forecast of microplastics treated by electrocoagulation: Influence of dissolved organic matter.

In recent years, the break of COVID-19 makes the large use of disposable products, which causes the removal of microplastics become an imperative problem. Electrocoagulation is one of the effective removal technologies, but there is hardly research concentrating on the effect of substrate in the actual water on the microplastics removal with electrocoagulation. As an important role of water bodies, dissolved organic matter (DOM) has a vital and inevitable effect on the efficiency of electrocoagulation. In this study, the effect of DOM in tailwater on microplastics during electrocoagulation is elucidated by comparing the electrocoagulation treatment results between simulated wastewater and tailwater, using parallel factor analysis (PARAFAC), Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectrometer (FTIR) and zeta potential analyzer. Three kinds of microplastic particles (i.e. polypropylene, polyethylene, and polymethyl methacrylate) were added into each of the two kinds of wastewaters to form six electrocoagulation systems. Results show that DOM in tailwater promotes the production of flocs and free radicals during electrocoagulation process. Fe2+ and Fe3+ are adsorbed on the surface of DOM molecules and combined with •OH form flocs. Although DOM accelerates the production of free radicals and thus promotes the aging of microplastics, flocs with DOM as crystal nucleus can prevent toxic substances and small-sized microplastics from leaching into water again. Therefore, electrocoagulation is preferred to removal microplastics in water with high concentration of DOM. This study provides a significant reference for microplastics removal by electrocoagulation in actual water, and promote the practical application of electrocoagulation for microplastics removal in water treatment.

Flexible, disposable photocatalytic plastic films for the destruction of viruses.

A thin, 30 µm, flexible, robust low-density polyethylene, LDPE, film, loaded with 30 wt% P25 TiO2, is extruded and subsequently rendered highly active photocatalytically by exposing it to UVA (352 nm, 1.5 mW cm-2) for 144 h. The film was tested for anti-viral activity using four different viruses, namely, two strains of Influenza A Virus (IAV), WSN, and a recombinant PR8, encephalomyocarditis virus (EMCV), and SARS-CoV-2 (SARS2). The film was irradiated with either UVA radiation (352 nm, 1.5 mW cm-2; although only 0.25 mW cm-2 for SARS2) or with light from a cool white fluorescent lamp (UVA irradiance: 365 nm, 0.047 mW cm-2). In all cases the films exhibited an average virus inactivation rate of >1.5log/h. In the case of SARS2, the rates were > 2log/h, with the rate determined using a dedicated, low intensity UVA source (0.25 mW cm-2) only 1.3 x's faster than that for a cool white lamp (UVA irradiance = 0.047 mW cm-2), which suggests that SARS2 is particularly prone to photocatalytic inactivation even under low UV irradiation conditions, such as found in a room lit with just white fluorescent tubes. This is the first example of a flexible, very thin, photocatalytic plastic film, produced by a scalable process (extrusion), for virus inactivation. The potential of such a film for use as a disposable, self-sterilising thin plastic material alternative to the common, non-photocatalytic, inert equivalent used currently for curtains, aprons and table coverings in healthcare is discussed briefly.

Adsorption of benzalkonium chlorides onto polyethylene microplastics: Mechanism and toxicity evaluation.

Usage of disposable plastic products and disinfectants has been skyrocketing due to the COVID-19 pandemic. The random disposal of plastic products may result in greater microplastic pollution. Benzalkonium chloride is known as one of the most common ingredients of disinfectants. In this study, the adsorption behavior of benzalkonium chlorides (BAC12, BAC14, BAC16) on polyethylene microplastics (PE-MPs) and the combined toxic effects were investigated using batch adsorption experiment and Daphnia magna. The results showed that PE-MPs had strong adsorption capacity for BACs and the adsorption capacity increased (11.03-22.77 mg g-1) with their octanol-water distribution coefficients. The effect of pH was negligible while dissolved organic matter inhibited the adsorption. A slightly inverse relationship between particle size of PE-MPs and adsorption was observed. Additionally, the MP aging with UV/H2O2 increased the adsorption of BAC12 but decreased that of relatively hydrophobic BAC14 and BAC16. The survival rate of Daphnia magna increased up to 100% in the presence of PE-MPs depending upon their adsorption capacities, suggesting that PE-MPs do not act as a carrier but rather as a scavenger for BACs. This study provides important information necessary for environmental risk assessment with regard to the combined pollution of MPs and toxic chemicals.

Polyethylene Films Containing Plant Extracts in the Polymer Matrix as Antibacterial and Antiviral Materials.

Low density polyethylene (LDPE) films covered with active coatings containing mixtures of rosemary, raspberry, and pomegranate CO2 extracts were found to be active against selected bacterial strains that may extend the shelf life of food products. The coatings also offer antiviral activity, due to their influence on the activity of Φ6 bacteriophage, selected as a surrogate for SARS-CoV-2 particles. The mixture of these extracts could be incorporated into a polymer matrix to obtain a foil with antibacterial and antiviral properties. The initial goal of this work was to obtain active LDPE films containing a mixture of CO2 extracts of the aforementioned plants, incorporated into an LDPE matrix via an extrusion process. The second aim of this study was to demonstrate the antibacterial properties of the active films against Gram-positive and Gram-negative bacteria, and to determine the antiviral effect of the modified material on Φ6 bacteriophage. In addition, an analysis was made on the influence of the active mixture on the polymer physicochemical features, e.g., mechanical and thermal properties, as well as its color and transparency. The results of this research indicated that the LDPE film containing a mixture of raspberry, rosemary, and pomegranate CO2 extracts incorporated into an LDPE matrix inhibited the growth of Staphylococcus aureus. This film was also found to be active against Bacillus subtilis. This modified film did not inhibit the growth of Escherichia coli and Pseudomonas syringae cells; however, their number decreased significantly. The LDPE active film was also found to be active against Φ6 particles, meaning that the film had antiviral properties. The incorporation of the mixture of CO2 extracts into the polymer matrix affected its mechanical properties. It was observed that parameters describing mechanical properties decreased, although did not affect the transition of LDPE significantly. Additionally, the modified film exhibited barrier properties towards UV radiation. Modified PE/CO2 extracts films could be applied as a functional food packaging material with antibacterial and antiviral properties.

Role of polymeric materials in preventing COVID-19 infection.

The safety of personal protective equipment (PPE) is very important, and so is the choice of materials used. The ability of electrostatic charges (ESCs) generated from the friction of engineered materials to attract or repel viruses has a significant impact on their applications. This study examined the ESCs generated on the surface of PPE used by healthcare workers to enhance their potential effectiveness in protecting the wearer from viruses. This is a crucial consideration for the newly emerged severe acute respiratory syndrome corona virus 2 (SARS-CoV-2), which has a negative charge. The magnitudes and signs of generated ESCs on the surfaces of the PPE were determined experimentally using an Ultra Stable Surface DC Voltmeter. The high negative ESCs acquired by the polyethylene disposable cap and facemask are expected to repel negatively charged viruses and prevent them from adhering to the outer layer of the material. Also, the choice of polypropylene for facemasks and gowns is excellent because it is an aggressively negatively charged material in the triboelectric series. This property guarantees that facemasks and gowns can repel viruses from the wearer. However, the positive ESCs generated on latex glove surfaces are of great concern because they can attract negatively charged viruses and create a source of infection. In conclusion, it is necessary to ensure that PPE be made of materials whose surfaces develop a negative ESC to repel viruses, as well as to select polyethylene gloves.